| Name | Pin Cutter – End Cutting, Tungsten Carbide |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;3245-49;3245-59;3245-49_3245-59; |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Nine H Surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Pin Cutter – End Cutting, Tungsten Carbide
end cutting, tungsten carbide Pin Cutter is an instrument ideally suited for use in a variety of surgical procedures that require insertion and length adjustment to wire. A unique feature of this instrument is the pin block which minimizes the changes of the jaws being overloaded. Additionally there is an adjustment nut which enables the blades to be adjusted during heavy use or after the blade has been replaced. This instrument is suited for side cutting and is available in three lengths 16″, 18.5″ and 22″ and with varied max cutting capacity 4.7 mm, 6.3 and 6.3 mm respectively.
Description
Reviews (0)
Shipping & Delivery
Related products
End Cutter – Double Spring, Large, Tungsten Carbide
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Flat Nose Pliers
serrated jaws, 5-1/2" (14.0 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Flush Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)Â Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Hercules-Type Front & Side Cutter
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Hercules-Type Wire Cutter – 2.2 mm Wire Max
for drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7" (18.0 cm)Â Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 2.2 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Kirschner Bow
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)Â Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Reviews
There are no reviews yet.